Mistral

Onduleur online monophase double conversion - 1 a 10 KVA

On vous rappelle ?

Votre nom

Votre numéro de téléphone

share it

DESCRIPTION	MISTRAL 1 KVA	MISTRAL 2 KVA	MISTRAL 3 KVA	MISTRAL 6 KVA	MISTRAL 10 KVA
Capacity	900(W)	1800(W)	2700(W)	5400(W)	9000(W)
INPUT
Input voltage	220/ 230/ 240 Vac ( P+N+T)
Operating input voltage	120 – 276 Vac
Operating frequency range	45 – 55 Hz/ 54 – 66 Hz ± 0.5 Hz
Input power factor	≥ 0.98			≥ 0.99
Bypass voltage range	Max voltage.: +15% (optional +15%, +10%, +25%) Min voltage.: -45% (optional -15%, -20%, -30%) Protected frequency range: ±10%			220V ± 25% (optional +10%, +15%, +20% ) 230: +20% (optional +10%, +15%) 240: +15% (optional +10%) Min voltage: -45% (optional -20%, -30%)
Bypass frequency range	± 10%
Total Harmonic Distortion (THD)	≤ 3% (Linear mode) ≤5% (Non linear mode)			≤ 3% (100% Linear mode)
Generator input	Supported
OUTPUT
Output voltage	220/ 230/ 240 Vac (Adjustable)
Power factor	0.9
Voltage regulation	±2%
Frequency (Online mode)	50 or 60Hz			±1%/ ±2%/ ±4%/ ±5%/ ±10% Rated frequency (optional)
Frequency (Battery mode)	≤5% (Non linear mode)			50/ 60 (±0.1) Hz
Crest factor	3:1
Total Harmonic Distortion (THD)	≤ 2% (Linear mode)/ ≤ 5% (Non linear mode)
Wave form	Pure Sinewave
BATTERY
Battery voltage	Optional voltage (±96/ ±108/ 120 VDC)
Typical recharge time	6-8 hours ( 90% of full capacity)
Backup time	Long run unit depends on the capacity of external batteries. Estimated remaining time displayed on front LCD
Charge current	Max current: 10A, charge current can be set according to battery capacity installed
SYSTEM FEATURES
Transfer time	Utility to battery: 0ms – Utility to bypass: 0ms
Overload (Linear mode)	Load (≤110% last 60min/ ≤125% last 10min/ ≤150% last 1sec/ >150% turn back to bypass mode
Overload (Battery mode)	10A input breaker	15A input breaker	20A input breaker	40A input breaker	60A input breaker
Short circuit	Hold whole system
Overheat	Line mode: switch to bypass – Backup mode: switch down the UPS immediately
Low battery voltage	Alarm and switch OFF
Self diagnostic	Upon power ON and software control
Battery	Advanced (smart) battery management
Noise suppression	Complies with EN62040-2
Audible & visual alarms	Line failure, battery low, Overload, system fault
Status Led & LCD display	Line mode, backup mode, ECO mode, Bypass mode, Battery low, Battery bad, Overload & UPS fault
Reading on the LCD display	Input voltage, Input frequency, Output voltage, Output frequency, Load percentage,Battery voltage, Inner temperature & Remaining battery back-up time
Communication interface	USB, RS232, Parallel port, SNMP card, Relay card (optional)
ENVIRONMENT
Operating temperature	0 - 4 0 °C
Storage temperature	-25 °C – 55 °C
Humidity range	0 – 95% (non condensing)
Altitude	<1500m
Noise level	<55dB
PHYSICAL
Dimensions (l x h x p) mm	440x86.5x430		440x86.5x696	443 x 131 x 580 (3U)
Weight (Kg)	12		32	56	62
STANDARDS
Security	IEC/ EN62040 – 1 IEC/ EN60950 – 1
EMC	IEC/EN62040-2,IEC6100-4-2,IEC6100-4-3,IEC6100-4-4,IEC6100-4-5, IEC6100-4-6,IEC6100-4-8

DESCRIPTION	MISTRAL 1 KVA	MISTRAL 2 KVA	MISTRAL 3 KVA	MISTRAL 6 KVA	MISTRAL 10 KVA
Capacity	900(W)	1800(W)	2700(W)	5400(W)	9000(W)
INPUT
Input voltage	220/ 230/ 240 Vac ( P+N+T)
Operating input voltage	120 – 276 Vac
Operating frequency range	45 – 55 Hz/ 54 – 66 Hz ± 0.5 Hz
Input power factor	≥ 0.98			≥ 0.99
Bypass voltage range	Max voltage.: +15% (optional +15%, +10%, +25%) Min voltage.: -45% (optional -15%, -20%, -30%) Protected frequency range: ±10%			220V ± 25% (optional +10%, +15%, +20% ) 230: +20% (optional +10%, +15%) 240: +15% (optional +10%) Min voltage: -45% (optional -20%, -30%)
Bypass frequency range	± 10%
Total Harmonic Distortion (THD)	≤ 3% (Linear mode) ≤5% (Non linear mode)			≤ 3% (100% Linear mode)
Generator input	Supported
OUTPUT
Output voltage	220/ 230/ 240 Vac (Adjustable)
Power factor	0.9
Voltage regulation	±2%
Frequency (Online mode)	50 or 60Hz			±1%/ ±2%/ ±4%/ ±5%/ ±10% Rated frequency (optional)
Frequency (Battery mode)	≤5% (Non linear mode)			50/ 60 (±0.1) Hz
Crest factor	3:1
Total Harmonic Distortion (THD)	≤ 2% (Linear mode)/ ≤ 5% (Non linear mode)
Wave form	Pure Sinewave
BATTERY
Battery voltage	Optional voltage (±96/ ±108/ 120 VDC)
Typical recharge time	6-8 hours ( 90% of full capacity)
Backup time	Long run unit depends on the capacity of external batteries. Estimated remaining time displayed on front LCD
Charge current	Max current: 10A, charge current can be set according to battery capacity installed
SYSTEM FEATURES
Transfer time	Utility to battery: 0ms – Utility to bypass: 0ms
Overload (Linear mode)	Load (≤110% last 60min/ ≤125% last 10min/ ≤150% last 1sec/ >150% turn back to bypass mode
Overload (Battery mode)	10A input breaker	15A input breaker	20A input breaker	40A input breaker	60A input breaker
Short circuit	Hold whole system
Overheat	Line mode: switch to bypass – Backup mode: switch down the UPS immediately
Low battery voltage	Alarm and switch OFF
Self diagnostic	Upon power ON and software control
Battery	Advanced (smart) battery management
Noise suppression	Complies with EN62040-2
Audible & visual alarms	Line failure, battery low, Overload, system fault
Status Led & LCD display	Line mode, backup mode, ECO mode, Bypass mode, Battery low, Battery bad, Overload & UPS fault
Reading on the LCD display	Input voltage, Input frequency, Output voltage, Output frequency, Load percentage,Battery voltage, Inner temperature & Remaining battery back-up time
Communication interface	USB, RS232, Parallel port, SNMP card, Relay card (optional)
ENVIRONMENT
Operating temperature	0 - 4 0 °C
Storage temperature	-25 °C – 55 °C
Humidity range	0 – 95% (non condensing)
Altitude	<1500m
Noise level	<55dB
PHYSICAL
Dimensions (l x h x p) mm	440x86.5x430		440x86.5x696	443 x 131 x 580 (3U)
Weight (Kg)	12		32	56	62
STANDARDS
Security	IEC/ EN62040 – 1 IEC/ EN60950 – 1
EMC	IEC/EN62040-2,IEC6100-4-2,IEC6100-4-3,IEC6100-4-4,IEC6100-4-5, IEC6100-4-6,IEC6100-4-8

Protégez votre investissement

Développez votre entreprise en toute tranquillité grâce au service après-vente réputé de Sodibur. Les garanties Sodibur vous couvrent pour bien plus que l’entretien de votre appareil.

Ingénieurs de service formés en usine
Installation rapide et première mise en service
Conseils et formation d’experts

Mistral

Onduleur Online

Onduleur Online /Onduleur online monophase double conversion - 1 a 10 KVA

Cette serie d'onduleur présente plusieurs caracteristiques que l'on retrouve usuellement dans des gammes séparées.

Ces modeles sont online double conversion, avec un facteur de puissance de 0.9, convertibles rack/tour, utilisent des packs batteries additionnels plug and play qui vous permettent de choisir facilement votre autonomie et offrent également des extensions réseau SNMP, AS400 ou encore BMS.

Comme les autre onduleurs, ils vous protegent des coupures de courant, surtensions, soustensions, foudre et distortions harmoniques diverses.

Mistral 3KVA

31 048,85 MURTTC

Il en reste 2 en stock

Pourquoi choisir IPower International Ltd ?

Les clients choisissent un équipement IPower International Ltd qu’ils savent qu’il leur permettra de faire ce dont ils ont besoin - et bien plus encore. Nous avons pour mission d'être les meilleurs et non les plus grands, c’est pourquoi nos solutions sont les plus fiables dans le secteur.

Plus de 35 ans d’excellence technique, de confiance.
Une technologie solide et flexible et des résultats qui se répètent
Un service après-vente et une assistance inégalés

Contactez-nous dès aujourd’huiet découvrez pourquoi IPower International Ltd est le premier choix pour les entreprises d’impression du monde entier.

Vous pouvez nous contacter par téléphone au +23059889080/+23059881999 ou par email sur [email protected] ou encore en utilisant le chat en bas a droite de l'écran.

Vous pouvez aussi nous laisser vos coordonnées ici pour que l'on vous rappelle.

Votre nom

Votre numéro de téléphone